Difference between revisions of "MS14 LEDs"
From Wiki for Dragino Project
| Line 33: | Line 33: | ||
| un-programmable, indicate there is power on board. | | un-programmable, indicate there is power on board. | ||
|} | |} | ||
| + | |||
| + | |||
| + | For how to use AR9331 LED , consult [http://wiki.openwrt.org/doc/uci/system#wifi.activity] | ||
Latest revision as of 03:13, 10 October 2013
There are 6 LEDs on the ms14. Their silksceen and feature is as below:
From Left to Right:
| LED | Wired | Feature |
|---|---|---|
| WLAN | AR9331 GPIO0 | This LED is mapped as dragino2:red:wlan. by default it is controlled by wifi. see document /etc/config/system |
| WAN | AR9331 GPIO17 | mapped as dragino2:red:wan |
| LAN | AR9331 GPIO13 | Active LOW, mapped as dragino2:red:lan |
| SYS | AR9331 GPIO28 | mapped as dragino2:red:usb |
| Heartbeat | Sensor_LED | Control by the Sensor led pins in 2x8 connector, active LOW |
| PWR | Power | un-programmable, indicate there is power on board. |
For how to use AR9331 LED , consult [1]
