Difference between revisions of "MS14 LEDs"
From Wiki for Dragino Project
| Line 15: | Line 15: | ||
| WAN | | WAN | ||
| AR9331 GPIO17 | | AR9331 GPIO17 | ||
| − | | | + | | mapped as dragino2:red:wan |
|- | |- | ||
| LAN | | LAN | ||
| Line 23: | Line 23: | ||
| SYS | | SYS | ||
| AR9331 GPIO28 | | AR9331 GPIO28 | ||
| − | | | + | | mapped as dragino2:red:usb |
|- | |- | ||
| Heartbeat | | Heartbeat | ||
Revision as of 03:11, 10 October 2013
There are 6 LEDs on the ms14. Their silksceen and feature is as below:
From Left to Right:
| LED | Wired | Feature |
|---|---|---|
| WLAN | AR9331 GPIO0 | This LED is mapped as dragino2:red:wlan. by default it is controlled by wifi. see document /etc/config/system |
| WAN | AR9331 GPIO17 | mapped as dragino2:red:wan |
| LAN | AR9331 GPIO13 | Active LOW, mapped as dragino2:red:lan |
| SYS | AR9331 GPIO28 | mapped as dragino2:red:usb |
| Heartbeat | Sensor_LED | Control by the Sensor led pins in 2x8 connector, active LOW |
| PWR | Power | un-programmable, indicate there is power on board. |
