How to set the transmit time interval
From Wiki for Dragino Project
Introduction
This chapter describes how to set Transmit Time Interval.
Downlink Payload
TDC can be controlled by Downlink Payload.
For example: AT+TDC=0x258=600s Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal.
If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type
code is 01.
Payload: 01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s
Downlink Method
See use note for different serves Servers Note
