Release Note

From Wiki for Dragino Project
Revision as of 21:08, 20 August 2013 by Edwin1123 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


FIRMWARE DOWNLOAD LINK


Version 2.2-IoT-3:

Version 2.2-IoT-2:

  • update seeedstudio sensor_table and actuator_table

Version 2.2-IoT-1:

  • Add support to RESTful server : xively.com, yeelink.net
  • Auto create node / delete node / post data to RESTful server
  • Add a general interface for connecting to daughter board.

Applicatino Note is available at http://www.dragino.com/downloads/index.php?dir=MS12/Application_Note/

Version 2.1-beta-4:

  • Add tun kernel module support.

Version 2.1-beta-3:

  • Add Transparent Mode for UART rx.

Version 2.1-beta-2:

  • Change the IoT server configure part to support more Internet of Things server.
  • Provide Flexible method to update data to local server (tftp etc) now.

Version 2.1-beta-1:

  • Change Pachube name to Cosm
  • Change default URL to check external IP in DDNS page
  • Add Chinese cupport by default
  • Add language option in GUI

Version 2.0-beta-1:

  • Remove Flukso Service
  • Disable RestFUL service
  • Change CSS and Logo
  • Make Network configure more friendly

Version 1.0-beta-1:

  • Add Firmware upgrade page in the GUI, now user can upgrade img via GUI.
  • Add fallback ip for LAN port. the IP is 172.31.255.254/30. To access the ip, user can add the ip 172.31.255.253 netmask 255.255.255.252 to their computer.
  • Add an UCI option to disable display daugther board info. Comment it in /etc/config/luci
  • Increase the speed of GUI interface
  • DDNS setting -- auto apply after save in Web
  • Add timezone option in GUI.
Retrieved from "https://wiki1.dragino.com/index.php?title=Release_Note&oldid=466"