Introduction

This topic is talking about to set up the relationship between IoT and IP Telephony network.

We will do different tests below to show how to integrate IoT into VoIP network. We will use the open source Asterisk software here for voip connection.

Test 1: Install Asterisk in Dragino make internal calls

Purpose

Asterisk is a powerful, open source software to build telephony system. Softphone can be runed in either PC or smart phone. The purpose for this test is getting start with Asterisk and soft phone.

Install and run Asterisk in Dragino

make sure your Dragino have network connection, Run:

root@dragino-bc8622:~# opkg update      // Update the valid package list
root@dragino-bc8622:~# opkg install asterisk18          // install asterisk v1.8
root@dragino-bc8622:~# opkg install asterisk18-app-system       // install asterisk system command applications. 

after install Asterisk, we can run:

root@dragino-bc8622:~# asterisk                        // Start Asterisk Server
root@dragino-bc8622:~# asterisk -vvvvvvgrc             // Connect to Asterisk Server console
Asterisk 1.8.7.1, Copyright (C) 1999 - 2011 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
  == Parsing '/etc/asterisk/asterisk.conf':   == Found
Connected to Asterisk 1.8.7.1 currently running on dragino-bc8622 (pid = 1207)
Verbosity was 0 and is now 6
   -- Remote UNIX connection
dragino-bc8622*CLI>