Firmware and Source Code
From Wiki for Dragino Project
Revision as of 18:23, 29 August 2014 by Edwin1123 (Talk | contribs) (→method to get into u-Boot enviroment)
Contents
Firmware Type
There are now two different firmwares which can be used in Dragino MS14 or HE:
Mesh IoT Firmware
The Mesh firmware has enhance network support such as WiFi Mesh, 3G. It also support the basic Arduino Bridge features and remote upgrade. Link for this firmware:
Source code and How to Compile
Arduino Yun Firmware
This firmware is derived from the official Arduino Yun firmware with some bug fixed and support more avrs.
Change to different Firmware Type in U-Boot
method to get into u-Boot enviroment
- use UART to RS232 adapter : Access U-Boot via Serial
- via U-Boot netconsole mode : U-Boot Netconsole
