Compile A Mesh IoT firmware

Below are tested under Ubuntu 10.04 and Ubuntu 14.04 LTS .

Get source code from Github

git clone https://github.com/dragino/dragino2.git dragino2-AA-IoT

Set up build environment

cd dragino2-AA-IoT
./set_up_build_enviroment.sh ms14

Build image

./build_image.sh ms14

You should be able to get the firmware in bin directory under image directory.

Customized Selected Modules

The ./build_image.sh ms14 will generated the firmware base on the default .config file. If user has changed the package selection. they can run below command in the ms14 directory (build directory) to select their preferable modules and build the firmware:

make menuconfig

Select modules and then run

make -j8

This command will generat in the customized firmware in the ms14/bin directory. User can test this firmware by this way. After testing is ok, user can set up their own customized build by:

• cp ms14/.config to dragino2-AA-IoT/.config.YOUR_APP
• cp dragino2-AA-IoT/files-IoT to dragino2-AA-IoT/files-YOUR_APP
• run ./build_image.sh ms14 YOUR_APP to build the firmware and get the files in dragino2-AA-IoT/image folder