Difference between revisions of "How to set the transmit time interval"
From Wiki for Dragino Project
David.huang (Talk | contribs) |
David.huang (Talk | contribs) |
||
| Line 7: | Line 7: | ||
For example: | For example: | ||
AT+TDC=0x258=600s | AT+TDC=0x258=600s | ||
| + | Payload: 01 00 02 58 TDC=600s | ||
The time interval is represented by hexadecimal conversion to decimal. | The time interval is represented by hexadecimal conversion to decimal. | ||
[[File:TDC.png]] | [[File:TDC.png]] | ||
| Line 15: | Line 16: | ||
code is 01. | code is 01. | ||
| − | Payload: 01 00 00 1E TDC= | + | Payload: 01 00 00 1E TDC=30s |
| − | Payload: 01 00 00 3C TDC= | + | Payload: 01 00 00 3C TDC=60s |
[[File:Downlink playload TDC.png]] | [[File:Downlink playload TDC.png]] | ||
Revision as of 01:52, 31 July 2020
Introduction
This chapter describes how to set Transmit Time Interval.
Downlink Payload
TDC can be controlled by Downlink Payload.
For example:
AT+TDC=0x258=600s
Payload: 01 00 02 58 TDC=600s
The time interval is represented by hexadecimal conversion to decimal.
If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type
code is 01.
Payload: 01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s
