Revision as of 02:29, 8 May 2018

Introduction

Dragino Mesh IoT firmware is compiled intend to support both Mesh and IoT.

The firmware can be downloaded from IoT Firmware

IoT--build-v4.3.4-20180507-1426

Fix the Gateway settings can't take effect bug and the problem with the lg01_pkt_fwd process.

IoT--build-v4.3.3-20180326-1515

Add the settings to configure MQTT on web pages
Add MCU Watchdog(Reset MCU while sketch hang up)
Switch. And optimized functionality.Refer this link: Through_MQTT_to_upload_data.

IoT--build-v4.3.2-20180201-1221

Improve the LoRaWAN packet forward software. now support downlink. For LoRaWAN, User must use the single_pkt_fwd_v003.hex in the LG01 sketch, the download link is: single_pkt_fwd.

IoT--build-v4.3.0-20170927-2125

Compile the firmware and packages to fix the kernel mismatch issue when use opkg update. Future plan: version 4.x.0 will has match packages while 4.x.x such as 4.3.1 may have mismatch kernel issue. User still can use --force-depends for install in such version.

IoT--build-v4.2.3-20170819-1544

Add a MCU version field in UI, Used to show the current sketch version use in micro-controller. The firmware will read /var/avr/fw_version for this purpose.
Add Sensor Data Page in UI, this will show the data in /var/iot/data in ASCII, HEX and BIN format.
Add LoRaWAN server setting in UI, provide a way to configure the LoRaWAN server info. and the sketch in MCU can read it. More detail please refer manual or this link.
Add LoRa Radio setting in UI, so sketch can load the LoRa Radio settings. More detail please refer manual.
Add IoT Server page, user can select different IoT Server, TODO, more detail please refer manual. Function not added yet.
Rewrite packet forward into C to increase efficient.

IoT--build-v4.2.1-20170626-0926

Fix GPSWOX Server Connection

IoT--build-v4.2.0-20170606-0958

Add feature upgrade avr sketch via web UI
Add gps tracker
Auto-detect USB modem EC20/UC20
Add mosquitto_sub, mosquitto_pub

IoT--build-v4.1.0-20170508-1838

Upgrade system to OpenWRT Chaos Calmer 15.05
Fix some broken link for Bridge support. now support the bridge example and mailbox example in Arduino bridge.

IoT--build--v3.4.0--20161010-0855

Add Curl, to support HTTPCLIENT in Arduino.
Add Auto-Select 3G modem, If the device detect the UC20 3G or EC20 4G module, and Internet connection is select to USB-modem. It will auto -configure the proper configuration to use UC20/EC20 for internet connection. User may still need to configure the APN for its provider.
Inet_reliable test for debug purpose
1. Change option debug_inet '1' in the file /etc/config/system.
2. Reboot the device,
3. Internet Connection info will be shown in the file /root/inet_reliable_test_report
Add lsusb command

IoT--build--v3.3.0--20160812-1705

add avahi support for Yun application
add avrdude support for Yun application
add Bridge support for Yun application. note: It works on baud rate 115200. use bridge.begin(115200) in Arduino Sketch.
remove rf gateway page

IoT-build--v3.1.2--20151206-2031

Fix some GUI minor configure bugs.
Use Mesh Group for identify of different mesh network
Add support for USB Ethernet Dongle. More>>

IoT-build--v3.1.1--20151126-2008

Fix start up bug in mesh.
configure mesh via web no need to reboot now.

IoT-build--v3.1.0--20151124-0941

Significant update in this version, source code move from OpenWrt Attitute Adjustment 12.09 to OpenWrt Barrier Breaker 14.07. the new source code are in: Dragino BB source code

New feature added:

toggle button are now able to reset the network or system to factory default. Feature Description

IoT-build--v1.3.6--20150411-2217

Fix mesh network set up issue.
TCP-Client --> remove '0A' on outgoing string.
Add SFTP server.

IoT-build--v1.3.4--20141229-1056

Correct package resource path
Change firewall rule in WAN interface. Now computer in the same network can access the device via its Internet Access Interface (WAN, Mesh WiFi, WiFi Client, 3G Network).

IoT-build-20141207-2350 -- v1.3.3

TCP_Client: add update on_change option
TCP_Client: Improve timing and Keep Alive method.

IoT-build-20141204-1401 -- v1.3.2

Add TCP Client Support in the IoT service page.

IoT-build-20141123-2356 -- v1.3.1

Upgrade to openwrt AA 12.09 branches, -- revision 43274. EVDO dial up bug fix in this branch.
Fix HTTP Port change bug
Add IoT Service support page and support Xively.

IoT-build-20140902-1654 -- v1.2.5

Fix Upload Arduino Sketch Bug
Add 115200 indicate string while select Arduino Bridge mode. User should modify the Baud Rate in Arduino IDE --> Library--> Bridge.h from 250000 to 115200 to use the Arduino Bridge class in this image.
Add Power UART Interface
Fix CDMA EVDO dial up UI issue.

IoT-build-20140902-1654 -- v1.2.4

Fix GUI bug to configure device as a WiFi Client.
Correct opkg.conf link.
Change config partition from read only to read-write. Firmware upgrade command won't erase this partition
Add check network connection. User can use Global LED to check connection to specify host.
Add sensor page to support different avr board.

IoT-build-20140627-1259 -- v1.2.3

Improve UART for stable transfer to Arduino board.

IoT-build-20140627-1259 -- v1.2.2

Add Arduino Bridge Support. Baud Rate 115200. This is an Experimental feature, user has change the arduino bridge baud rate (under libraries\Bridge\src\Bridge.h) from 250000 to 115200 to use this.
Add stty tool

IoT-build-20140616-1526 version 1.2.1

Fix Firmware Version Display Bug
Fix DHCP server disable bug.
Change AP SSID.
FallBack IP still works after apply change in network.
Fix DNS1 bug in GUI
Fix WiFi AP disable/enable bug
Add default USB modem dial string
Add better USB support in the GUI.
Clean Asterisk Script

Web-FailSafe

A version which use to upgrade the firmware to support Web_FailSafe_Uboot. Instruction.

RC1.1-- 2014 -04

Change Default SSH log in to root/dragino
Add support on Arduino IDE, now user can program the avr from Arduino IDE via network connection. Instruction.

@@ Line 6: / Line 6: @@
 <br>
 ==IoT--build-v4.3.4-20180507-1426==
-# Fix the Gateway settings can't take effect bug.
+# Fix the Gateway settings can't take effect bug and the problem with the lg01_pkt_fwd process.
 <br>

Difference between revisions of "Mesh IoT Firmware"