Difference between revisions of "Firmware and Source Code"
From Wiki for Dragino Project
(→Change to different Firmware Type in U-Boot) |
(→Firmware Type) |
||
| Line 5: | Line 5: | ||
<span CLASS=subtitle>Mesh IoT Firmware</span> | <span CLASS=subtitle>Mesh IoT Firmware</span> | ||
| − | The Mesh firmware has enhance network support such as WiFi Mesh, 3G. It also support the basic Arduino Bridge features and | + | The Mesh firmware has enhance network support such as WiFi Mesh, 3G. It also support the basic Arduino Bridge features and Arduino IDE upgrade. Link for this firmware: |
[[Mesh_IoT_Firmware|Release Note]] | [[Mesh_IoT_Firmware|Release Note]] | ||
Revision as of 19:27, 15 September 2014
Contents
Firmware Type
There are now two different firmwares which can be used in Dragino MS14 or HE:
Mesh IoT Firmware
The Mesh firmware has enhance network support such as WiFi Mesh, 3G. It also support the basic Arduino Bridge features and Arduino IDE upgrade. Link for this firmware:
Source code and How to Compile
Arduino Yun Firmware
This firmware is derived from the official Arduino Yun firmware with some bug fixed and support more avrs.
Change to different Firmware Type in U-Boot
Both firmware types has its upgrade web page for firmware upgrade. But the web upgrade doesn't support to upgrade to different type firmware.
method to get into u-Boot enviroment
- use UART to RS232 adapter : Access U-Boot via Serial
- via U-Boot netconsole mode : U-Boot Netconsole
