Difference between revisions of "Motherboard Upgrade Firmware"
From Wiki for Dragino Project
(Created page with "There are several methods to flash the firmware of a Dragino MS12. =Upgrade firmware via Redboot= *Copy openwrt-atheros-vmlinux.lzma and openwrt-atheros-root.squashfs to your t...") |
(→Upgrade firmware via Redboot) |
||
| Line 6: | Line 6: | ||
*run below commands to flash | *run below commands to flash | ||
RedBoot> fis init | RedBoot> fis init | ||
| + | About to initialize [format] FLASH image system - continue (y/n)? y | ||
| + | *** Initialize FLASH Image System | ||
| + | ... Erase from 0xa87d0000-0xa87e0000: . | ||
| + | ... Program from 0x80ff0000-0x81000000 at 0xa87d0000: . | ||
RedBoot> load -r -b %{FREEMEMLO} openwrt-atheros-vmlinux.lzma | RedBoot> load -r -b %{FREEMEMLO} openwrt-atheros-vmlinux.lzma | ||
| + | Using default protocol (TFTP) | ||
| + | Raw file loaded 0x8003e000-0x800edfff, assumed entry at 0x8003e000 | ||
RedBoot> fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7 | RedBoot> fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7 | ||
| + | ... Erase from 0xa8030000-0xa80e0000: ........... | ||
| + | ... Program from 0x8003e000-0x800ee000 at 0xa8030000: ........... | ||
| + | ... Erase from 0xa87d0000-0xa87e0000: . | ||
| + | ... Program from 0x80ff0000-0x81000000 at 0xa87d0000: . | ||
RedBoot> load -r -b %{FREEMEMLO} openwrt-atheros-root.squashfs | RedBoot> load -r -b %{FREEMEMLO} openwrt-atheros-root.squashfs | ||
| + | Using default protocol (TFTP) | ||
| + | Raw file loaded 0x8003e000-0x8045dfff, assumed entry at 0x8003e000 | ||
RedBoot> fis create rootfs | RedBoot> fis create rootfs | ||
| + | ... Erase from 0xa80e0000-0xa8500000: .................................................................. | ||
| + | ... Program from 0x8003e000-0x8045e000 at 0xa80e0000: .................................................................. | ||
| + | ... Erase from 0xa87d0000-0xa87e0000: . | ||
| + | ... Program from 0x80ff0000-0x81000000 at 0xa87d0000: . | ||
RedBoot> reset | RedBoot> reset | ||
Revision as of 02:24, 23 March 2011
There are several methods to flash the firmware of a Dragino MS12.
Upgrade firmware via Redboot
- Copy openwrt-atheros-vmlinux.lzma and openwrt-atheros-root.squashfs to your tftp server
- [Motherboard_Redboot|Access Redboot via Telnet]
- run below commands to flash
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xa87d0000-0xa87e0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87d0000: .
RedBoot> load -r -b %{FREEMEMLO} openwrt-atheros-vmlinux.lzma
Using default protocol (TFTP)
Raw file loaded 0x8003e000-0x800edfff, assumed entry at 0x8003e000
RedBoot> fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7
... Erase from 0xa8030000-0xa80e0000: ...........
... Program from 0x8003e000-0x800ee000 at 0xa8030000: ...........
... Erase from 0xa87d0000-0xa87e0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87d0000: .
RedBoot> load -r -b %{FREEMEMLO} openwrt-atheros-root.squashfs
Using default protocol (TFTP)
Raw file loaded 0x8003e000-0x8045dfff, assumed entry at 0x8003e000
RedBoot> fis create rootfs
... Erase from 0xa80e0000-0xa8500000: ..................................................................
... Program from 0x8003e000-0x8045e000 at 0xa80e0000: ..................................................................
... Erase from 0xa87d0000-0xa87e0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87d0000: .
RedBoot> reset
