Difference between revisions of "Web FailSafe Uboot"
From Wiki for Dragino Project
(Created page with "=Introduction=") |
(→Introduction) |
||
| Line 1: | Line 1: | ||
=Introduction= | =Introduction= | ||
| + | The new shipped MS14 is equipped with the Web FailSafe UBoot from [https://github.com/pepe2k/u-boot_mod/ https://github.com/pepe2k/u-boot_mod/]. This U-boot provide Web Interface and Netconsole feature, it eliminates the need of UART while user have to upgrade firmware in U-Boot. | ||
| + | |||
| + | To check if MS14 is loaded with the Web Failsafe U-Boot, user can press the toggle button and power on the device. The left four LEDs will blink together every second if the MS14 has the Web Failsafe U-boot. | ||
| + | |||
| + | There is a counter in the Web Failsafe U-Boot, the counter will start from 0 and it increase one on every blinking of the four LEDs. The system will be in four different working mode depends on the status of the counter: | ||
| + | * | ||
Revision as of 02:19, 11 March 2014
Introduction
The new shipped MS14 is equipped with the Web FailSafe UBoot from https://github.com/pepe2k/u-boot_mod/. This U-boot provide Web Interface and Netconsole feature, it eliminates the need of UART while user have to upgrade firmware in U-Boot.
To check if MS14 is loaded with the Web Failsafe U-Boot, user can press the toggle button and power on the device. The left four LEDs will blink together every second if the MS14 has the Web Failsafe U-boot.
There is a counter in the Web Failsafe U-Boot, the counter will start from 0 and it increase one on every blinking of the four LEDs. The system will be in four different working mode depends on the status of the counter:
