Difference between revisions of "Notes for Helium"
(→Introduction) |
(→Introduction) |
||
| Line 5: | Line 5: | ||
Below list the support products and Requirements: | Below list the support products and Requirements: | ||
| − | # | + | # 1LoRaWAN Gateway model:[http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html DLOS8],[http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html LPS8] |
| − | # | + | # 2Firmware version since :[https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/lgw--build-v5.4.1618196981-20210412-1111/ lgw--build-v5.4.1618196981-20210412-1111] |
what you'll learm in this tutotal | what you'll learm in this tutotal | ||
Revision as of 20:23, 7 May 2021
Contents
Introduction
The Dragino Gateway can commuicate with Helium LoRanWAN Server
Below list the support products and Requirements:
- 2Firmware version since :lgw--build-v5.4.1618196981-20210412-1111
what you'll learm in this tutotal
How to Install Hlelium Server at the gateway
How to add up your end-node with Hlelium console
How to Install Hlelium Server at the gateway
Step 1: Enter Helium IoT Client from the gateway web
user can enter the gateway web and find the Helium IoT
Step 2: Download the Helium Server
user click Download Helium Server in which the gateway will download the Helium server
Note:Please click Download again if user the gateway no return the Hlium IoT page after the first click Download.
Step 3: Install the Helium Server
User can click the botton of Install Helium Server in which the gateway will Install the Helium Server
Note:User will see the echo charactets of Helium Server has been Installed successfully.
Step 4: Save&start the Helium Server
User can click the botton of Save&Apply in which the gateway will start the Helium Server.
