Difference between revisions of "How to set the transmit time interval"
From Wiki for Dragino Project
(→Downlink Payload) |
|||
| Line 9: | Line 9: | ||
Payload: 01 00 02 58 TDC=600s | Payload: 01 00 02 58 TDC=600s | ||
The time interval is represented by hexadecimal conversion to decimal. | The time interval is represented by hexadecimal conversion to decimal. | ||
| + | |||
[[File:TDC.png]] | [[File:TDC.png]] | ||
Latest revision as of 08:14, 27 November 2020
Introduction
This chapter describes how to set Transmit Time Interval.
Downlink Payload
TDC can be controlled by Downlink Payload.
For example: AT+TDC=0x258=600s Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal.
If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type
code is 01.
Payload: 01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s
Downlink Method
See use note for different serves Servers Note
