Difference between revisions of "End Device Frequency Band"

From Wiki for Dragino Project
Jump to: navigation, search
(→‎AS920-923 & AS923-925 : AS923-1 (AS923))
(→‎Introduction)
Line 3: Line 3:
 
* TTN Frequency Band Settings: https://www.thethingsnetwork.org/docs/lorawan/frequency-plans.html  
 
* TTN Frequency Band Settings: https://www.thethingsnetwork.org/docs/lorawan/frequency-plans.html  
 
* Frequency Bands vs Country List : Section 1.2 of [https://lora-alliance.org/sites/default/files/2020-02/rp_2-1.0.1.pdf LoRaWAN Regional Parameters]
 
* Frequency Bands vs Country List : Section 1.2 of [https://lora-alliance.org/sites/default/files/2020-02/rp_2-1.0.1.pdf LoRaWAN Regional Parameters]
 +
 +
=OTAA Join Behaviour=
 +
For 005 LoRaWAN stack: to save battery, once boot, device will make first make 200 tries for OTAA Join, the time period of two Join Requests will depends on the DR and the airtime requirement. After this 200 Join finish, device will send a join request every 20 minutes. If device reboot, it will do above loop again.
  
 
=Default Frequency Bands=
 
=Default Frequency Bands=

Revision as of 21:11, 5 January 2021

Introduction

This page list the default frequency band for Dragino End Devices. The frequency bands are base on TTN Frequency Bands. User can modify upgrade firmware to support different frequency band or use AT Command to change the sub band in some frequency bands.

OTAA Join Behaviour

For 005 LoRaWAN stack: to save battery, once boot, device will make first make 200 tries for OTAA Join, the time period of two Join Requests will depends on the DR and the airtime requirement. After this 200 Join finish, device will send a join request every 20 minutes. If device reboot, it will do above loop again.

Default Frequency Bands

EU863-870 (EU868)

  • Uplink:
    • 868.1 - SF7BW125 to SF12BW125
    • 868.3 - SF7BW125 to SF12BW125 and SF7BW250
    • 868.5 - SF7BW125 to SF12BW125
    • 867.1 - SF7BW125 to SF12BW125
    • 867.3 - SF7BW125 to SF12BW125
    • 867.5 - SF7BW125 to SF12BW125
    • 867.7 - SF7BW125 to SF12BW125
    • 867.9 - SF7BW125 to SF12BW125
    • 868.8 - FSK


  • Downlink:
    • Uplink channels 1-9 (RX1)
    • 869.525 - SF9BW125 (RX2 downlink only)



US902-928 (US915)

Used in USA, Canada and South America. Default use CHE=2, Subband 2

  • Uplink:
    • 903.9 - SF7BW125 to SF10BW125
    • 904.1 - SF7BW125 to SF10BW125
    • 904.3 - SF7BW125 to SF10BW125
    • 904.5 - SF7BW125 to SF10BW125
    • 904.7 - SF7BW125 to SF10BW125
    • 904.9 - SF7BW125 to SF10BW125
    • 905.1 - SF7BW125 to SF10BW125
    • 905.3 - SF7BW125 to SF10BW125


  • Downlink:
    • 923.3 - SF7BW500 to SF12BW500
    • 923.9 - SF7BW500 to SF12BW500
    • 924.5 - SF7BW500 to SF12BW500
    • 925.1 - SF7BW500 to SF12BW500
    • 925.7 - SF7BW500 to SF12BW500
    • 926.3 - SF7BW500 to SF12BW500
    • 926.9 - SF7BW500 to SF12BW500
    • 927.5 - SF7BW500 to SF12BW500
    • 923.3 - SF12BW500(RX2 downlink only)


KZ865

  • Uplink -- 125Khz , DR0 - DR5
    • 865.1
    • 865.2
    • 865.5
    • 865.7
    • 865.9
  • Downlink:
    • The RX1 receive window uses the same channel as the preceding uplink.
    • The RX2 receive window uses a fixed frequency and data rate. The default parameters are 866.7MHz / DR0 (SF12, 125 kHz)​




CN470-510 (CN470)

Used in China, Default use CHE=1

  • Uplink:
    • 486.3 - SF7BW125 to SF12BW125
    • 486.5 - SF7BW125 to SF12BW125
    • 486.7 - SF7BW125 to SF12BW125
    • 486.9 - SF7BW125 to SF12BW125
    • 487.1 - SF7BW125 to SF12BW125
    • 487.3 - SF7BW125 to SF12BW125
    • 487.5 - SF7BW125 to SF12BW125
    • 487.7 - SF7BW125 to SF12BW125
  • Downlink:
    • 506.7 - SF7BW125 to SF12BW125
    • 506.9 - SF7BW125 to SF12BW125
    • 507.1 - SF7BW125 to SF12BW125
    • 507.3 - SF7BW125 to SF12BW125
    • 507.5 - SF7BW125 to SF12BW125
    • 507.7 - SF7BW125 to SF12BW125
    • 507.9 - SF7BW125 to SF12BW125
    • 508.1 - SF7BW125 to SF12BW125
    • 505.3 - SF12BW125 (RX2 downlink only)


AU915-928(AU915)

Default use CHE=2

  • Uplink:
    • 916.8 - SF7BW125 to SF12BW125
    • 917.0 - SF7BW125 to SF12BW125
    • 917.2 - SF7BW125 to SF12BW125
    • 917.4 - SF7BW125 to SF12BW125
    • 917.6 - SF7BW125 to SF12BW125
    • 917.8 - SF7BW125 to SF12BW125
    • 918.0 - SF7BW125 to SF12BW125
    • 918.2 - SF7BW125 to SF12BW125
  • Downlink:
    • 923.3 - SF7BW500 to SF12BW500
    • 923.9 - SF7BW500 to SF12BW500
    • 924.5 - SF7BW500 to SF12BW500
    • 925.1 - SF7BW500 to SF12BW500
    • 925.7 - SF7BW500 to SF12BW500
    • 926.3 - SF7BW500 to SF12BW500
    • 926.9 - SF7BW500 to SF12BW500
    • 927.5 - SF7BW500 to SF12BW500
    • 923.3 - SF12BW500(RX2 downlink only)


AS923

Notice for AS923 Frequency Bands

Since RP002-1.0.1LoRaWAN Regional Parameters, AS923 include three different default settings for different countries: AS923-1, AS923-2 and AS923-3.

AS923-1 use the same default uplink frequency as previous AS923 firmware. AS923-2 and AS923-3 are new with different default uplink frequency. User need to know exactly the frequency bands from the LoRaWAN server and choose the right firmware version for the end node.




AS920-923 & AS923-925 : AS923-1 (AS923)

  • Default Uplink channel:
    • 923.2 - SF7BW125 to SF10BW125
    • 923.4 - SF7BW125 to SF10BW125


  • Additional Uplink Channel: These channels are set during OTAA Join process from server. Below are the settings from TTN
  • AS920~AS923:
    • 922.2 - SF7BW125 to SF10BW125
    • 922.4 - SF7BW125 to SF10BW125
    • 922.6 - SF7BW125 to SF10BW125
    • 922.8 - SF7BW125 to SF10BW125
    • 923.0 - SF7BW125 to SF10BW125
    • 922.0 - SF7BW125 to SF10BW125
  • AS923 ~ AS925:
    • 923.6 - SF7BW125 to SF10BW125
    • 923.8 - SF7BW125 to SF10BW125
    • 924.0 - SF7BW125 to SF10BW125
    • 924.2 - SF7BW125 to SF10BW125
    • 924.4 - SF7BW125 to SF10BW125
    • 924.6 - SF7BW125 to SF10BW125
  • Downlink:
    • Uplink channels 1-8 (RX1)
    • 923.2 - SF10BW125 (RX2)



AS923-2

  • Default Uplink channel:
    • 921.4 - SF7BW125 to SF10BW125
    • 921.6 - SF7BW125 to SF10BW125


  • Additional Uplink Channels: These channels are set during OTAA Join process from server.
  • Downlink:
    • Uplink channels 1-8 (RX1)
    • 921.4 - SF10BW125 (RX2)



AS923-3

  • Default Uplink channel:
    • 916.6 - SF7BW125 to SF10BW125
    • 916.8 - SF7BW125 to SF10BW125


  • Additional Uplink Channels: These channels are set during OTAA Join process from server.
  • Downlink:
    • Uplink channels 1-8 (RX1)
    • 916.6 - SF10BW125 (RX2)



KR920-923 (KR920)

  • Default channel:
    • 922.1 - SF7BW125 to SF12BW125
    • 922.3 - SF7BW125 to SF12BW125
    • 922.5 - SF7BW125 to SF12BW125
  • Uplink: (OTAA mode, channel added by JoinAccept message)
    • 922.1 - SF7BW125 to SF12BW125
    • 922.3 - SF7BW125 to SF12BW125
    • 922.5 - SF7BW125 to SF12BW125
    • 922.7 - SF7BW125 to SF12BW125
    • 922.9 - SF7BW125 to SF12BW125
    • 923.1 - SF7BW125 to SF12BW125
    • 923.3 - SF7BW125 to SF12BW125
  • Downlink:
    • Uplink channels 1-7(RX1)
    • 921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)


IN865-867 (IN865)

  • Uplink:
    • 865.0625 - SF7BW125 to SF12BW125
    • 865.4025 - SF7BW125 to SF12BW125
    • 865.9850 - SF7BW125 to SF12BW125
  • Downlink:
    • Uplink channels 1-3 (RX1)
    • 866.550 - SF10BW125 (RX2)


Frequency Bands for different server

Retrieved from "https://wiki1.dragino.com/index.php?title=End_Device_Frequency_Band&oldid=7431"