Difference between revisions of "Connector and Pins for MS14"

From Wiki for Dragino Project
Jump to: navigation, search
(Created page with "==2x8 Router Connector== {| class="wikitable" border="1" align="center" |- ! PIN ! Function |- | VDD33 | 3.3 V power output |- | VDD5_LDO | 5V power output |- | COLD_RESET...")
 
(→‎2x8 Router Connector)
Line 52: Line 52:
 
|  SENSOR_LED
 
|  SENSOR_LED
 
|  Connect to SENSOR_LED, active LOW
 
|  Connect to SENSOR_LED, active LOW
 +
|}
 +
 +
 +
 +
==2 x 7 Sensor Connector==
 +
POS1 ~ POS12 To  Sensor OUT screw terminal. With 5V ESD protect
 +
 +
 +
==2 x 5 JTAG Connector==
 +
{| class="wikitable" border="1" align="center"
 +
|-
 +
!  PIN
 +
!  Function
 +
|-
 +
|  GPIO26
 +
|  GPIO26
 +
|-
 +
|  GPIO27
 +
|  GPIO27
 +
|-
 +
|  JTAG_TMS
 +
|  JTAG_TMS
 +
|-
 +
|  JTAG_TCK
 +
|  JTAG_TCK
 +
|-
 +
|  JTAG_TDI
 +
|  JTAG_TDI
 +
|-
 +
|  JTAG_TDO
 +
|  JTAG_TDO
 +
|-
 +
|  GPIO15
 +
|  GPIO15
 +
|-
 +
|  GPIO16
 +
|  GPIO16
 
|}
 
|}

Revision as of 22:29, 23 August 2013

2x8 Router Connector

PIN Function
VDD33 3.3 V power output
VDD5_LDO 5V power output
COLD_RESET COLD_RESET, used to reset ms14.
GND GND
GPIO20 GPIO20, SLIC_FS_IN, I2S_SD
GPIO19 GPIO19, SLIC_FS_OUT, I2S_WS
GPIO22 GPIO22, SLIC_DATA_IN, I2S_MICIN
GPIO21 GPIO21, SLIC_DATA_OUT, I2S_MCK
GPIO23 GPIO23, SPDIF_OUT
GPIO18 GPIO18, SLIC_CLK, I2S_CK
GND GND
GPIO24 GPIO24
UART_RX UART_RX
UART_TX UART_TX
RAW_VCC Connect to POWER Input net
SENSOR_LED Connect to SENSOR_LED, active LOW


2 x 7 Sensor Connector

POS1 ~ POS12 To Sensor OUT screw terminal. With 5V ESD protect


2 x 5 JTAG Connector

PIN Function
GPIO26 GPIO26
GPIO27 GPIO27
JTAG_TMS JTAG_TMS
JTAG_TCK JTAG_TCK
JTAG_TDI JTAG_TDI
JTAG_TDO JTAG_TDO
GPIO15 GPIO15
GPIO16 GPIO16
Retrieved from "https://wiki1.dragino.com/index.php?title=Connector_and_Pins_for_MS14&oldid=547"