Difference between revisions of "How to set the transmit time interval"
From Wiki for Dragino Project
David.huang (Talk | contribs) |
(→Downlink Payload) |
||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
=Downlink Payload= | =Downlink Payload= | ||
| − | TDC can be controlled by Downlink Payload | + | TDC can be controlled by Downlink Payload. |
| + | |||
For example: | For example: | ||
| + | AT+TDC=0x258=600s | ||
| + | Payload: 01 00 02 58 TDC=600s | ||
| + | The time interval is represented by hexadecimal conversion to decimal. | ||
| + | |||
[[File:TDC.png]] | [[File:TDC.png]] | ||
| + | |||
| + | <br> | ||
| + | <br> | ||
| + | If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type | ||
| + | code is 01. | ||
| + | |||
| + | Payload: 01 00 00 1E TDC=30s | ||
| + | Payload: 01 00 00 3C TDC=60s | ||
| + | |||
| + | [[File:Downlink playload TDC.png]] | ||
| + | |||
| + | =Downlink Method= | ||
| + | See use note for different serves [[Main_Page#Use_Note_for_Server|Servers Note]] | ||
Latest revision as of 08:14, 27 November 2020
Introduction
This chapter describes how to set Transmit Time Interval.
Downlink Payload
TDC can be controlled by Downlink Payload.
For example: AT+TDC=0x258=600s Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal.
If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type
code is 01.
Payload: 01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s
Downlink Method
See use note for different serves Servers Note
