===ABP network access test example===

===ABP network access test example===

* <span CLASS=greentext>The test code</span>'''[https://github.com/dragino/Arduino-Profile-Examples/blob/master/libraries/Dragino/examples/LoRa/LoRaWAN/LoRaWAN_ABP]'''

* <span CLASS=greentext>The test code</span>'''[https://github.com/dragino/Arduino-Profile-Examples/blob/master/libraries/Dragino/examples/LoRa/LoRaWAN/LoRaWAN_ABP ABP]'''

* We open the Arduino IDE.as shown in the figure：

* We open the Arduino IDE.as shown in the figure：

<span CLASS=redtext>Tips</span>:The value you register when you create the device, copy it and replace it with the code in it.

<span CLASS=redtext>Tips</span>:The value you register when you create the device, copy it and replace it with the code in it.

===OTAA network access test example===

===OTAA network access test example===

*<span CLASS=greentext>The test code</span>'''[https://github.com/dragino/Arduino-Profile-Examples/blob/master/libraries/Dragino/examples/LoRa/LoRaWAN/LoRaWAN_OTAA]'''

*<span CLASS=greentext>The test code</span>'''[https://github.com/dragino/Arduino-Profile-Examples/blob/master/libraries/Dragino/examples/LoRa/LoRaWAN/LoRaWAN_OTAA OTAA]'''

* We open the Arduino IDE.As shown in the figure：

* We open the Arduino IDE.As shown in the figure：

<span CLASS=redtext>Tips</span>:The value you register when you create the device, copy it and replace it with the code in it.

<span CLASS=redtext>Tips</span>:The value you register when you create the device, copy it and replace it with the code in it.

==The detailed steps==

==The detailed steps==

* Go to [[#Code link | Code link]] and download

* Go to [[#Code link | Code link]] and find <span CLASS=redtext>3.DHT11_ThingPark</span> to download

* Open arduino IDE  

* Open arduino IDE  

* Modify your corresponding registration value

* Modify your corresponding registration value

[[File:Upload9.png|600px|none|thumb|]]

[[File:Upload9.png|600px|none|thumb|]]

==The results==

==The check results==

* Tip: Now nodes upload data showed a bit problem in ThinkPark, but as a test to upload the net is no problem. You can see the nodes can be uploaded after reading the data..In addition, DHT11 will print real temperature and humidity data at any time.We will make a little improvement in the future, and if you have good Suggestions,  you can communicate with me in any time.

* Tip: Now nodes upload data showed a bit problem in ThinkPark, but as a test to upload the net is no problem. You can see the nodes can be uploaded after reading the data..In addition, DHT11 will print real temperature and humidity data at any time.We will make a little improvement in the future, and if you have good Suggestions,  you can communicate with me in any time.

* Find your data from the side of the message

* Find your data from the side of the message

[[File:Upload6.png|600px|none|thumb|]]

[[File:Upload8.png|600px|none|thumb|]]

=FAQ=

=FAQ=

* You can download one of the Blink routines at will, if you can download it, then you have no problem with the current software.

* You can download one of the Blink routines at will, if you can download it, then you have no problem with the current software.