Difference between revisions of "Firmware and Source Code"
From Wiki for Dragino Project
(→method to get into u-Boot enviroment) |
(→Command to Upgrade to Mesh IoT firmware) |
||
| Line 33: | Line 33: | ||
[[Upgrade_Firmware_ms14#Upgrade Firmware via in U-boot|Upgrade to Mesh IoT firmware]] | [[Upgrade_Firmware_ms14#Upgrade Firmware via in U-boot|Upgrade to Mesh IoT firmware]] | ||
| + | <br> | ||
| + | |||
| + | ==Command to Upgrade to Mesh IoT firmware== | ||
| + | |||
| + | [[Getting_Start_with_Arduino_Yun#Upgrade_via_U-Boot|Upgrade to Arduino Yun firmware]] | ||
Revision as of 18:24, 29 August 2014
Contents
Firmware Type
There are now two different firmwares which can be used in Dragino MS14 or HE:
Mesh IoT Firmware
The Mesh firmware has enhance network support such as WiFi Mesh, 3G. It also support the basic Arduino Bridge features and remote upgrade. Link for this firmware:
Source code and How to Compile
Arduino Yun Firmware
This firmware is derived from the official Arduino Yun firmware with some bug fixed and support more avrs.
Change to different Firmware Type in U-Boot
method to get into u-Boot enviroment
- use UART to RS232 adapter : Access U-Boot via Serial
- via U-Boot netconsole mode : U-Boot Netconsole
