Difference between revisions of "Mesh IoT Firmware"
From Wiki for Dragino Project
(→IoT-build-20140627-1259 -- v1.2.2) |
|||
| Line 3: | Line 3: | ||
The firmware can be downloaded from [http://www.dragino.com/downloads/index.php?dir=motherboards/ms14/Firmware/IoT/ IoT Firmware] | The firmware can be downloaded from [http://www.dragino.com/downloads/index.php?dir=motherboards/ms14/Firmware/IoT/ IoT Firmware] | ||
| + | |||
| + | ==IoT-build-20140627-1259 -- v1.2.3== | ||
| + | *Improve UART for stable transfer to Arduino board. | ||
| + | |||
| + | <br> | ||
| + | <br> | ||
| + | |||
==IoT-build-20140627-1259 -- v1.2.2== | ==IoT-build-20140627-1259 -- v1.2.2== | ||
Revision as of 04:02, 27 July 2014
Contents
Introduction
Dragino Mesh IoT firmware is compiled intend to support both Mesh and IoT.
The firmware can be downloaded from IoT Firmware
IoT-build-20140627-1259 -- v1.2.3
- Improve UART for stable transfer to Arduino board.
IoT-build-20140627-1259 -- v1.2.2
- Add Arduino Bridge Support. Baud Rate 115200. This is an Experimental feature, user has change the arduino bridge baud rate (under libraries\Bridge\src\Bridge.h) from 250000 to 115200 to use this.
- Add stty tool
IoT-build-20140616-1526 version 1.2.1
- Fix Firmware Version Display Bug
- Fix DHCP server disable bug.
- Change AP SSID.
- FallBack IP still works after apply change in network.
- Fix DNS1 bug in GUI
- Fix WiFi AP disable/enable bug
- Add default USB modem dial string
- Add better USB support in the GUI.
- Clean Asterisk Script
Web-FailSafe
- A version which use to upgrade the firmware to support Web_FailSafe_Uboot. Instruction.
RC1.1-- 2014 -04
- Change Default SSH log in to root/dragino
- Add support on Arduino IDE, now user can program the avr from Arduino IDE via network connection. Instruction.
