Difference between revisions of "Web FailSafe Uboot"
(→Introduction) |
(→Introduction) |
||
| Line 1: | Line 1: | ||
=Introduction= | =Introduction= | ||
| − | The new shipped MS14 is equipped with the Web FailSafe UBoot from [https://github.com/pepe2k/u-boot_mod/ https://github.com/pepe2k/u-boot_mod/]. This U-boot provide Web Interface and Netconsole feature, it eliminates the need of UART while user have to upgrade firmware in U-Boot. | + | The new shipped MS14 is equipped with the Web FailSafe UBoot from [https://github.com/pepe2k/u-boot_mod/ https://github.com/pepe2k/u-boot_mod/]. This U-boot provide Web Interface and Netconsole feature, it eliminates the need of UART while user have to upgrade firmware in U-Boot, User can access to u-boot via its LAN interface. |
| Line 14: | Line 14: | ||
<br> | <br> | ||
<br> | <br> | ||
| + | |||
=Web FailSafe Mode= | =Web FailSafe Mode= | ||
In this mode, ms14 will have a default IP 192.168.255.1. User can set their PC to 192.168.255.x and access to this ip via web browser | In this mode, ms14 will have a default IP 192.168.255.1. User can set their PC to 192.168.255.x and access to this ip via web browser | ||
Revision as of 02:40, 11 March 2014
Introduction
The new shipped MS14 is equipped with the Web FailSafe UBoot from https://github.com/pepe2k/u-boot_mod/. This U-boot provide Web Interface and Netconsole feature, it eliminates the need of UART while user have to upgrade firmware in U-Boot, User can access to u-boot via its LAN interface.
To check if MS14 is loaded with the Web Failsafe U-Boot, user can press the toggle button and power on the device. The left four LEDs will blink together every second if the MS14 has the Web Failsafe U-boot.
There is a counter in the Web Failsafe U-Boot, the counter will start from 0 and it increase one on every blinking of the four LEDs. The system will be in four different working modes depends on the status of the counter:
- < 3 sec: System will boot into OpenWrt Linux
- 3 ~ 5 sec: Web FailSafe U-Boot
- 5 ~ 7 sec: u-boot UART Console
- > 7 sec: u-boot netconsole
Web FailSafe Mode
In this mode, ms14 will have a default IP 192.168.255.1. User can set their PC to 192.168.255.x and access to this ip via web browser
