View source for Release Note



[http://www.dragino.com/downloads/index.php?dir=motherboards/ms12/Firmware/ '''''FIRMWARE DOWNLOAD LINK''''']


==Version 2.2-IoT-3:==
*Add A hidden page http://IP/cgi-bin/luci/uart. which can be used to transmit data to UART port. 

==Version 2.2-IoT-2:==
*update seeedstudio sensor_table and actuator_table

==Version 2.2-IoT-1:==
*Add support to RESTful server : xively.com, yeelink.net
*Auto create node / delete node / post data to RESTful server
*Add a general interface for connecting to daughter board. 
Applicatino Note is available at http://www.dragino.com/downloads/index.php?dir=MS12/Application_Note/

==Version 2.1-beta-4:==
*Add tun kernel module support.   

==Version 2.1-beta-3:==
*Add Transparent Mode for UART rx.  

==Version 2.1-beta-2:==
*Change the IoT server configure part to support more Internet of Things server.
*Provide Flexible method to update data to local server (tftp etc) now.

==Version 2.1-beta-1:==
*Change Pachube name to Cosm
*Change default URL to check external IP in DDNS page
*Add Chinese cupport by default
*Add language option in GUI

==Version 2.0-beta-1:==
*Remove Flukso Service
*Disable RestFUL service
*Change CSS and Logo
*Make Network configure more friendly

==Version 1.0-beta-1:==
*Add Firmware upgrade page in the GUI, now user can upgrade img via GUI. 
*Add fallback ip for LAN port. the IP is 172.31.255.254/30. To access the ip, user can add the ip 172.31.255.253 netmask 255.255.255.252 to their computer.
*Add an UCI option to disable display daugther board info. Comment it in /etc/config/luci 
*Increase the speed of GUI interface
*DDNS setting --  auto apply after save in Web
*Add timezone option in GUI.