View source for NB-IoT FAQ

NB-IoT FAQ:

=Can i use the NB-IoT Module to connect to IoT Server like ThingsSpeak =
For the NB-IoT Network, user can only send the packets via UDP protocol to an Public IP in the internet. The flow is like below:
[[File:NB-IoT_E_0.png|800px|none|thumb|Click this link for [[NB-IoT_UDP | Example Code]]]]

While user want to send the data via NB-IoT to an IoT server. The set up should meet below requirement:
# The IoT Server must be of public address so the NB-IoT carrier can forward the UDP packet to it. 
# The public address for the IoT Server must be in the carrier's white list. Some carrier ask use to submit the IP before they can route to it. while some carrier doesn't have this requirement. 
# The UDP packet will be forwarded to the IoT Server as it is . So the IoT server should be able to handle the UDP format, which defined in the NB-IoT node's software. 

If user want to use  complex protocol such as FTP/ TCP(IP) to the IoT Server, user can select the module which loaded with Quectel QG96. It can transfer the packet no only on NB-IoT, but in emtc, egprs. The supported protocol is here: [http://www.dragino.com/downloads/index.php?dir=NB-IoT/BG96/ QG96 Documents].