View source for Access MS14

You can access ms14 via SSH, Web GUI or RS232. below are the detail:

==Fall Back IP==
A fall back IP 172.31.255.254/255.255.255.252 is assigned to ms14's LAN port so user can always access ms14 with this ip via the IP 172.31.255.253/255.255.255.252.
[[File:set_windows_fallback_ip.jpg|500px|none|thumb|Set windows ip to access ms14 via fall back ip]]



==SSH Access==
MS14 is running OpenWrt Linux system. You can access it via SSH and customized the system for different application. 

1/ You should know ms14's LAN port ip or WiFi ip, or use fall back ip. Then configure your computer to the same IP segment as ms14. 

2/ Then run putty to access ms14. default user name and password of ms14 is: 
 username: root
 password: dragino
[[File:putty_access.jpg|500px|none|thumb|Use putty to access ms14]]

3/ Once login successfully, you should see below welcome page. 
[[File:putty_access_login.jpg|500px|none|thumb|SSH Welcome Page]]

==GUI Access==
ms14 has built-in web server and provide friendly GUI access. put its ip on your browser and input username /password to access.
[[File:GUI_login.jpg|500px|none|thumb|GUI login, default username/password: root/root]]

[[File:GUI_status.jpg|500px|none|thumb|Status is pop up once login successfully. ]]



==RS232 Access==
ms14 has UART interface exposed in the 2x8 connector. Developer can use a UART to RS232 converter to access ms14 u-boot via its serial interface. 

[[File:Connect_ARU_to_ms14.png|500px|none|thumb|Connect ARU to ms14 via UART]]

Configure the serial port with below parameters: 
Serial: 115200, 
Data: 8bits, 
Xon/Xoff enable

[[File:UART_configure_ms14.jpg|500px|none|thumb|ms14 serial port access]]

[[File:u-boot_ms14.jpg|500px|none|thumb|u-boot access via UART]]