View source for How to set the transmit time interval

=Introduction=
This chapter describes how to set Transmit Time Interval.

=Downlink Payload=
TDC can be controlled by Downlink Payload.

For example:
AT+TDC=0x258=600s  
The time interval is represented by hexadecimal conversion to decimal.
[[File:TDC.png]]

<br>
<br>
If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type 
code is 01. 

Payload: 01 00 00 1E TDC=30S
Payload: 01 00 00 3C TDC=60S

[[File:Downlink playload TDC.png]]